Electrolysis 2017-11-29T16:24:39+00:00


Electrolysis consists of simulating the behavior of the sea in your pool. Summing up: salt for swimming pools We lightly salt the water by adding common salt to your pool, in a proportion nine times less than that of salt in the sea, in a proportion similar to that of a tear. The electrolysis process is carried out through the chlorination cell, through which the salt (NaCl) is transformed into sodium hypochlorite (NaClO) dissolved in water, which is a powerful disinfectant that destroys all the microorganisms that may be present in the water. The cell will automatically generate the free chlorine needed for your pool and without the need to add anything other than salt to the water.



The water treatment by electrolysis is a closed system in which there is no salt consumption. The electrogenerated chlorine destroys the organic matter and pathogens present in the water, transforming back into sodium chloride (common salt, NaCl)

The ideal solution for private pools. The chlorine demand of a pool can vary from one installation to another due mainly to the difference in the number of bathers, environmental factors and general maintenance level of the installation. Therefore, we offer a wide range of models to adapt to the real needs of your pool.


Enhance oxidation and disinfection by ensuring optimum pH values. Avoid corrosive or fouling water. Better self-cleaning Reading and automatic regulation of pH.

Self-cleaning systems

Since Antiquity, the antiseptic properties of brackish waters are known for the treatment of eye, skin and nose conditions. The electrolysis systems have an automatic system that prevents the formation of calcareous incrustations in the electrolysis cell, which guarantees maintenance-free operation during the lifetime of the electrode set. The entrance and exit of the cell that contains the electrodes allows the direct bonding of 63mm diameter PVC pipe.

Easy installation

Saline electrolysis systems of domestic range can be installed in line or by-pass in the main outlet pipe, but always after the filter. In case the cell is installed in bypass, a valve must be introduced to regulate the flow through it.